- Usage:Â Renovation Team
- Model Number:Â X6
- Application:Â Paint Spray Gun
- Brand Name:Â VEVOR
- Origin:Â Mainland China
- Certification:Â CE
- Voltage:Â 230 V 50 Hz
- Recommended Annual Usage:Â 125 gal
- 517 Tip Spray Angle: 0 – 50°
- 517 Tip Spray Range:Â 10 – 12 in / 25 – 30 cm
- 517 Tip Diameter:Â 0.017 in / 0.43 mm
- Inlet Size:Â 1/4 in Thread
- Outlet Size:Â 7/8 in Thread
- Extension Rod Length:Â 11.8 in / 30 cm
- Extension Rod Material:Â Aluminum
- Flow Rate:Â 1.1 L/min / 0.24 GPM
- Hose Length:Â 25 ft
- Color:Â Black
- Operating Pressure:Â 3000 PSI
- Product Size:Â 13.38 x 10.62 x 16.14 in / 34 x 27 x 41 cm
VEVOR DIY Series——Stand Airless Paint Sprayer
Powder coating is widely used in home appliances, hardware, security doors, heat sinks, construction, auto parts, sports equipment, medical equipment, aluminum, and other industries. All the reach and quality you could ask for are right here. Get the job done right with VEVOR
Q: How to setup?
A: First, connect hose to gun. Remove red cap, connect hose to sprayer. Securely tighten. Second, turn gun trigger lock to locked position. Unthread spray tip and guard assembly. Third, turn Pressure Control Knob to lowest setting.
Q: How to start flushing?Â
A: Turn Power Switch OFF and plug sprayer into the grounded outlet. Separate small. Clear drain tube from large suction tube and place into waste pail. Submerge suction tube in water if spraying water-based material or flushing fluid if spraying oil-based. With the Prime/Spray Valve down to PRIME, turn Pressure Control Knob to Prime/Clean setting. Turn Power Switch ON. Allow fluid to flow out drain tube for 30-60 seconds. Turn Power Switch OFF.
Q: Storage fluid?
A: Remove Power Flush attachment from suction tube and Submerge suction tube. Turn Prime/Spray Valve down to PRIME. Turn Power Switch ON. Turn Pressure Control Knob to Prime/Clean setting. When Pump Armor comes out of drain tube, turn Pressure Control Knob to lowest setting and Power Switch OFF. Tum Prime/Spray Valve to SPRAY and install inlet strainer on suction tube for storage.
A: First, connect hose to gun. Remove red cap, connect hose to sprayer. Securely tighten. Second, turn gun trigger lock to locked position. Unthread spray tip and guard assembly. Third, turn Pressure Control Knob to lowest setting.
Q: How to start flushing?Â
A: Turn Power Switch OFF and plug sprayer into the grounded outlet. Separate small. Clear drain tube from large suction tube and place into waste pail. Submerge suction tube in water if spraying water-based material or flushing fluid if spraying oil-based. With the Prime/Spray Valve down to PRIME, turn Pressure Control Knob to Prime/Clean setting. Turn Power Switch ON. Allow fluid to flow out drain tube for 30-60 seconds. Turn Power Switch OFF.
Q: Storage fluid?
A: Remove Power Flush attachment from suction tube and Submerge suction tube. Turn Prime/Spray Valve down to PRIME. Turn Power Switch ON. Turn Pressure Control Knob to Prime/Clean setting. When Pump Armor comes out of drain tube, turn Pressure Control Knob to lowest setting and Power Switch OFF. Tum Prime/Spray Valve to SPRAY and install inlet strainer on suction tube for storage.
Features & Details
- Plenty of Usages: Whether your next big spray project requires you to be indoors or outdoors, you will be prepared to handle walls, furniture, fence, cabinet, shed, yard, and more. Applicable for a wide variety of water-based or oil-based paints such as latex paints, chalk, stain, sealer, varnish, etc. The 24.6ft / 7.5m hose is long enough to easily reach all your projects. Get ready to tackle any painting job around your home!
- Great Time Saver: Are you tired of coming up short? Our 7/8HP 650W motor is designed for higher efficiency work that sprays faster than a roller or brush and saves DIY homeowners a ton of time. With a recommended annual use of 125 gal/year and a maximum speed of 0.24GPM, this machine delivers a softer spray while aiming for a more consistent finish.
- Adjustable Flow Control: The output pressure can be adjusted by a control valve knob to meet your different spray needs. It ranges from 500PSI to 2900PSI between multiple modes. It is also able to save your money spent on paint by avoiding messy paint spills by up to 55%. The durable piston pump can spray unthinned paint at high pressure, which means users can draw paint directly from the paint buckle. Don’t let the pressure get to you. You are in control!
- Reach Higher Than Ever: You will receive a 517 tip and an 11.8in / 30cm tip extension rod. Our electric stand airless paint sprayer is dedicated to extending your range of reach and reducing fatigue when spraying high, low, or recessed areas. Ceilings, soffits, high walls, overhangs, decks, and other places that are just a little out of spray painting reach are no longer a challenge. Put your ladder and scaffolding equipment away, you got this!
- No Fear of Cleaning: This airless paint sprayer for home interiors and exteriors is easy to clean after use. Simply run a cleaning solution of water or solvent through the sprayer until all paint or stains are removed. It’s just that easy! We also offer a cleaning kit set for users to brush away any dust for better results and to extend the spray-gun life. Are you ready to tackle your next big project?
